SZG Series Conical Vacuum Dryer-Changzhou Erle Drying Equipment Co., Ltd.

Product Name:SZG Series Conical Vacuum Dryer
Tel:0519-88670123
Detailed SZG Series Conical Vacuum Dryer is a new generation drying device developed by our factory on the basis of combining the technology of similar equipment. It has two connecting ways, i.e. belt or chain.

Features：

When oil is used to heat, use automatic constant temperature control. It can be used for drying biology products and mine. Its temperature of operation can be adjusted form 20-160 ℃ . ● Compared to ordinal dryer, its heat efficiency will be 2 times higher. ● The heat is indirect. So the raw material can not be polluted. It is in conformity with the requirement of GMP. It is easy in washing and maintenance.

Principle：

● Heat source (for example, low pressure steam or thermal conduct oil) pass through the sealed jacket. The heat will be transmitted to raw material to be dried through inner shell; ● Under driving of power, the tank is rotated slowly and the raw material inside it is mixed continuously. The purpose of reinforced drying can be realized; ● The raw material exists is under vacuum. The drop of steam pressure makes the moisture (solvent) at the surface of raw material become saturation and will evaporate. The solvent will be discharged through vacuum pump an recovered in time. The inner moisture (solvent) of raw material will infiltrate, evaporate and discharge continuously. The three processes are carried out unceasingly and the purpose of drying can be realized within a short time.

Application：

It is suitable for the raw materials that need to concentrate, mixed and dried at low temperature (for example, biochemistry) products in chemical, pharmaceutical and foodstuff industries. Particularly it is suitable for the raw materials that are easy to be oxidized, volatilized and have heat sensitivity and is toxic and not permitted to destroy its crystal in drying process.

Technical parameters：

项目	单位	机型
名称	Unit	100	200	350	500	750	1000	1500	2000	3000	4000	5000
总容积	L	100	200	350	500	750	1000	1500	2000	3000	4000	5000
工作容积	L	50	100	175	250	375	500	750	1000	1500	2000	2500
加热面积	m2	1.16	1.5	2	2.63	3.5	4.61	5.58	7.5	10.2	12.1	14.1
转速	Rpm	6							5	4	4	4
功率	Kw	0.75	1.1	1.5	1.5	2	3	3	4	5.5	7.5	7.5
回转高度	mm	1810	1910	2090	2195	2500	2665	2915	3055	3530	3800	4180
整机重量	kg	825	1050	1350	1650	1800	2070	2250	3000	4500	5350	6000
罐内设计压力	Mpa	-0.09~0.096
夹层设计压力	Mpa	0.3
电机可根据用户要求选配调速电机，转速为0-6rpm 本机*容积可设计为10000L